The Denise Emulator doesn't have a lot of command line functions or an INI file to edit.
No doubt this will change over time.
Code: Select all
; -vic-6569R3 Select VIC-II 6569R3 and PAL mode
; -vic-8565 Select VIC-II 8565 and PAL mode
; -vic-6567R8 Select VIC-II 6567R8 and NTSC mode
; -vic-8562 Select VIC-II 6562 and NTSC mode
; -vic-6569R1 Select VIC-II 6569R1 and PAL mode
; -vic-6567R56A Select VIC-II 6567R56A and NTSC mode
; -vic-6572 Select VIC-II 6572 and PAL mode
; -vic-6573 Select VIC-II 6573 and NTSC mode with PAL Encoding
; -cia-6526a Select CIA 6526a
; -cia-6526 Select CIA 6526
; -reu <size in kb> Emulate REU Expansion
; -autostart-prg <value> Set autostart mode for PRG files (1: Inject, 2: Disk image)
;Specify SID model
If Key_SID CONTAINS(6581||8580)
Add_CLP( -sid-%sid_value%)
Else
;SID 6581 (default)
Add_CLP( -sid-6581)
End If
;Do we want a PAL or NTSC setup?
If PalNTSC = NTSC
Add_CLP( -vic-6567R8)
Else
;default PAL
Add_CLP( -vic-6569R3)
End If
; RAM Expansion Unit files
If Key_reu CONTAINS(128||256||512||1024||2048||4096||8192||16384)
ADD_CLP( -reu %reu_value%)
End If
If GameType CONTAINS(prg||p00)
ADD_CLP( -autostart-prg 2)
Else If GameType CONTAINS(d64||t64)
If %imageindex% EXCLUDES(0)
;Denise only starts with LOAD"*",8,1
; File selection on Disk or Tape image is not possible ATM.
Show_Message(You must load the correct GB file manually.)
End If
Else If GameType CONTAINS(crt||tap||g64)
End if
ADD_CLP( %gamepathfile%)
Run_Emulator()