Welcome to the Gamebase 64 forums. An attempt to document ALL Commodore 64 gameware before it's too late!
Amiga-Apps
Moderator: Jimbo
- Seiya
- Commended Member
Post
later i upload again the whole package with some more extras and fix
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- Seiya
- Commended Member
Post
@.mad
only for testing, i upgrade to WinUAE 3.5.0 and i'd like to add Picasso IV Zorro 3.
As this RTG Card require Flash rom driver i add these lines (can you check if can mount picasso iv?)
.uae file report these files, but from gamebase WinUAE don't detect nothing.
only for testing, i upgrade to WinUAE 3.5.0 and i'd like to add Picasso IV Zorro 3.
As this RTG Card require Flash rom driver i add these lines (can you check if can mount picasso iv?)
Code: Select all
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||gfxcard_size||4)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||gfxcard_type||PicassoIV_Z3)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||Picassoiv_rom_file||%dbpath%\Scripts\picasso_iv_flash.rom)
Code: Select all
picassoiv_rom_file=..\..\..\AmigaApps\Scripts\Picasso_iv_flash.rom
picassoiv_rom_file_id=A8133E7E,Picasso IV
gfxcard_size=4
gfxcard_type=PicassoIV_Z3
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- .mad.
- Honoured Member
- Location: Lancashire
Post
Hi Seiya,
It is not a winuae option i have ever used.
The Picasso rom location is not saved in the current GameBase UAE file or GameBase WinUAE.ini
So those lines will need to be added to them both.
Put the Picasso_iv_flash.rom in the System ROMs folder (KICKSTARTS).
Then rescan the system folder so it is saved in your WinUAE.ini.
under the [DetectedROMs] section.
select the Picasso rom manually in WinUAE 3.50 and save gfx card config as your GameBase UAE "AMIGA.UAE".
you should then be able to select picasso and gfx card from the options.
if you get the option you need working manually, send me the UAE file, picasso rom and any picasso dll files.
and i will script it for you.
online info...
Picasso96 requirements:
- Kickstart and Workbench 3.0 (V39) or later,
- Motorola MC68020 processor or better
and
UAE RTG board is Z3 32-bit board = requires 68020+.
mess with these settings as well... true/ false
gfx_vsync_picasso=false
gfx_vsyncmode_picasso=normal
gfx_fullscreen_picasso=false
It is not a winuae option i have ever used.
The Picasso rom location is not saved in the current GameBase UAE file or GameBase WinUAE.ini
So those lines will need to be added to them both.
Put the Picasso_iv_flash.rom in the System ROMs folder (KICKSTARTS).
Then rescan the system folder so it is saved in your WinUAE.ini.
under the [DetectedROMs] section.
select the Picasso rom manually in WinUAE 3.50 and save gfx card config as your GameBase UAE "AMIGA.UAE".
you should then be able to select picasso and gfx card from the options.
if you get the option you need working manually, send me the UAE file, picasso rom and any picasso dll files.
and i will script it for you.
online info...
Picasso96 requirements:
- Kickstart and Workbench 3.0 (V39) or later,
- Motorola MC68020 processor or better
and
UAE RTG board is Z3 32-bit board = requires 68020+.
mess with these settings as well... true/ false
gfx_vsync_picasso=false
gfx_vsyncmode_picasso=normal
gfx_fullscreen_picasso=false
- Seiya
- Commended Member
Post
ah ok, but i think not to continue. i saw to many difficulty. better not to use rtg board with external driver.
and i think uaegfx is ok for any situation.
and i think uaegfx is ok for any situation.
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- Seiya
- Commended Member
Post
instead, i tried to upgrade to winuae 3.5 but i found many problems even to make it all from scratch.
The problems concerning HDF file from Extra
It not detect graphic card (if i simple upgrade from 2.4.1 or find Picasso II); Z3 mem is disabled (it sets cpu at 24-Bit addressing even with 68030 or i forced to disable). From scratch it dsable z3mem ad use fast memory.
now i don't know if it is winuae problem o some script don't work more with this new version.
here è demo based on winuae 2.4.1 working well.
https://mega.nz/#!GpkV0DBK!6c2pXujjS_Xq ... -tGEgCHCb8
someone could try to upgrade to winuae 3.5 and maybe to see something that i'm not able to see.
The problems concerning HDF file from Extra
It not detect graphic card (if i simple upgrade from 2.4.1 or find Picasso II); Z3 mem is disabled (it sets cpu at 24-Bit addressing even with 68030 or i forced to disable). From scratch it dsable z3mem ad use fast memory.
now i don't know if it is winuae problem o some script don't work more with this new version.
here è demo based on winuae 2.4.1 working well.
https://mega.nz/#!GpkV0DBK!6c2pXujjS_Xq ... -tGEgCHCb8
someone could try to upgrade to winuae 3.5 and maybe to see something that i'm not able to see.
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- .mad.
- Honoured Member
- Location: Lancashire
Post
Hi Seiya,
The new Winuae config no longer works with the [EXTRA] added lines in the UAE file.
best solution is to have a custom UAE file for the gfx card and multi HD settings.
GameBase does't have a feature to edit duplicate config names.
even though it can be tricked with a bit of editing.
differences between BAD and WORKING uae files.
---------------
HALT ERROR
---------------
maprom=0xe00000
rtc=none
z3mem_size=0
cpu_type=68ec020/68881
cpu_24bit_addressing=true
hardfile2=rw,DH0:..\..\..\AmigaApps-demo\Scripts\WB31.HDF,32,1,2,512,0,,uae
uaehf0=hdf,rw,DH0:..\\..\\..\\AmigaApps-demo\\Scripts\\WB31.HDF,32,1,2,512,0,,uae
uaehf1=hdf,rw,DH1:..\\..\\..\\amigaapps-demo\\extra\\hdf\\i\\imagefx26.hdf,32,1,2,512,-128,,uae
[EXTRA]
hardfile2=rw,DH1:..\..\..\amigaapps-demo\extra\hdf\i\imagefx26.hdf,32,1,2,512,-128,,uae
---------------
WORKING
---------------
maprom=0xf000000
rtc=MSM6242B
z3mem_size=16
- gfxcard_size=4
- gfxcard_type=ZorroIII
cpu_type=68020/68881
cpu_24bit_addressing=false
hardfile2=rw,DH0:..\..\Scripts\WB31.HDF,32,1,2,512,0,,uae
uaehf0=hdf,rw,DH0:..\\..\\Scripts\\WB31.HDF,32,1,2,512,0,,uae
hardfile2=rw,DH1:..\..\extra\hdf\i\imagefx26.hdf,32,1,2,512,-128,,uae
uaehf1=hdf,rw,DH1:..\\..\\extra\\hdf\\i\\imagefx26.hdf,32,1,2,512,-128,,uae
The new Winuae config no longer works with the [EXTRA] added lines in the UAE file.
best solution is to have a custom UAE file for the gfx card and multi HD settings.
GameBase does't have a feature to edit duplicate config names.
even though it can be tricked with a bit of editing.
differences between BAD and WORKING uae files.
---------------
HALT ERROR
---------------
maprom=0xe00000
rtc=none
z3mem_size=0
cpu_type=68ec020/68881
cpu_24bit_addressing=true
hardfile2=rw,DH0:..\..\..\AmigaApps-demo\Scripts\WB31.HDF,32,1,2,512,0,,uae
uaehf0=hdf,rw,DH0:..\\..\\..\\AmigaApps-demo\\Scripts\\WB31.HDF,32,1,2,512,0,,uae
uaehf1=hdf,rw,DH1:..\\..\\..\\amigaapps-demo\\extra\\hdf\\i\\imagefx26.hdf,32,1,2,512,-128,,uae
[EXTRA]
hardfile2=rw,DH1:..\..\..\amigaapps-demo\extra\hdf\i\imagefx26.hdf,32,1,2,512,-128,,uae
---------------
WORKING
---------------
maprom=0xf000000
rtc=MSM6242B
z3mem_size=16
- gfxcard_size=4
- gfxcard_type=ZorroIII
cpu_type=68020/68881
cpu_24bit_addressing=false
hardfile2=rw,DH0:..\..\Scripts\WB31.HDF,32,1,2,512,0,,uae
uaehf0=hdf,rw,DH0:..\\..\\Scripts\\WB31.HDF,32,1,2,512,0,,uae
hardfile2=rw,DH1:..\..\extra\hdf\i\imagefx26.hdf,32,1,2,512,-128,,uae
uaehf1=hdf,rw,DH1:..\\..\\extra\\hdf\\i\\imagefx26.hdf,32,1,2,512,-128,,uae
- Seiya
- Commended Member
Post
as soon as possibile i'll try and if it works, i upgrade to new 3.5
but it seems very difficult..to me.
however, i'll try
i think it's more a problem concerning cpu and ram.
only from HDF gives HALT3 error. from floppy is ok.
24bit addressing is false. it is active only from HDF
so is it because hdf are in extra and in amiga.aue is set like you said?
[EXTRA]
hardfile...
----------------
from floppy i can set z3mem_size to any values and any other options that works very well.
but it seems very difficult..to me.
however, i'll try
i think it's more a problem concerning cpu and ram.
only from HDF gives HALT3 error. from floppy is ok.
24bit addressing is false. it is active only from HDF
so is it because hdf are in extra and in amiga.aue is set like you said?
[EXTRA]
hardfile...
----------------
from floppy i can set z3mem_size to any values and any other options that works very well.
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- Seiya
- Commended Member
Post
well i made some change to script:
in this way, hardfile 2 now is in gbgame/0/
and in UAE configuration there is no more [Extra]
however i have set all 24bit addressing with "False", but WinUAE 3.5 continue to set "true".
Code: Select all
;----------------------------------
;Remove Hard-Drive and WHD Images.
;----------------------------------
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||ide||none)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||uaehf0||)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||uaehf1||)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||hardfile2||)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||filesystem||)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||filesystem2||)
Set_INI_Value(%dbpath%\Scripts\Amiga.uae||hardfile2||)
Set_INI_Value(%dbpath%\Scripts\Amiga.uae||filesystem||)
Set_INI_Value(%dbpath%\Scripts\Amiga.uae||filesystem2||)
Code: Select all
If Key_HDF CONTAINS(DIR)
;===================================================================================================
; USE DIR Installed Workbench (Hard Drive stored as files on PC in %GameBase%\%database%\ name="hd"
;===================================================================================================
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||filesystem2||rw,DH0:appbase:%dbpath%\hd,0)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||uaehf0||dir,rw,DH0:appbase:%dbpath%\hd,0)
;-----------------------------------------------
;Put Game/Demo File in Hard Drive 1.
;-----------------------------------------------
Set_INI_Value(%dbpath%\Scripts\Amiga.uae||hardfile2||rw,DH1:%gamepathfile%,32,1,2,512,-128,,uae)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||uaehf1||hdf,rw,DH1:%gamepathfile%,32,1,2,512,-128,,uae)
;===================================================================================================
; USE DIR Installed Workbench (Hard Drive stored as files on PC in %GameBase%\%database%\ name="misc"
;===================================================================================================
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||filesystem2||rw,DH2:MISC:%dbpath%\misc,-128)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||uaehf2||dir,rw,DH2:MISC:%dbpath%\misc,-128)
;-----------------------------------------------
;Put Game/Demo File in Hard Drive 1.
;-----------------------------------------------
Set_INI_Value(%dbpath%\Scripts\Amiga.uae||hardfile2||rw,DH3:%gamepathfile%,32,1,2,512,-128,,uae)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||uaehf1||hdf,rw,DH3:%gamepathfile%,32,1,2,512,-128,,uae)
ElseIf Key_HDF CONTAINS(No WorkBench)
;-----------------------------------------------
;Put Game/Demo File in Hard Drive 0.
;-----------------------------------------------
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||hardfile2||rw,DH0:%gamepathfile%,32,1,2,512,-128,,uae)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||uaehf0||hdf,rw,DH0:%gamepathfile%,32,1,2,512,-128,,uae)
Else
;-----------------------------------------------
;Put WorkBench 3.1 in Hard Drive 0.
;-----------------------------------------------
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||hardfile2||rw,DH0:%dbpath%\Scripts\WB31.HDF,32,1,2,512,0,,uae)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||uaehf0||hdf,rw,DH0:%dbpath%\Scripts\WB31.HDF,32,1,2,512,0,,uae)
;-----------------------------------------------
;Put Game/Demo File in Hard Drive 1.
;-----------------------------------------------
Set_INI_Value(%dbpath%\Scripts\Amiga.uae||hardfile2||rw,DH1:%gamepathfile%,32,1,2,512,-128,,uae)
Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||uaehf1||hdf,rw,DH1:%gamepathfile%,32,1,2,512,-128,,uae)
and in UAE configuration there is no more [Extra]
however i have set all 24bit addressing with "False", but WinUAE 3.5 continue to set "true".
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- .mad.
- Honoured Member
- Location: Lancashire
Post
the main HALT problem is cpu 24bit.
It that script there are no editable GEMUS settings for HDF files.
only the sample default settings are stored in the script.
- this can be changed easy enough.
under the HDF section edit these two lines and see if it works with ImageFX.
old- Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||cpu_type||68ec020)
new- Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||cpu_type||68020/68881)
old- Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||cpu_24bit_addressing||true)
new- Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||cpu_24bit_addressing||false)
i have done a little tweaking and it works for me with a edited UAE file.
Just need to test it further...
It that script there are no editable GEMUS settings for HDF files.
only the sample default settings are stored in the script.
- this can be changed easy enough.
under the HDF section edit these two lines and see if it works with ImageFX.
old- Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||cpu_type||68ec020)
new- Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||cpu_type||68020/68881)
old- Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||cpu_24bit_addressing||true)
new- Set_CFG_Value(%dbpath%\Scripts\Amiga.uae||cpu_24bit_addressing||false)
i have done a little tweaking and it works for me with a edited UAE file.
Just need to test it further...
- Seiya
- Commended Member
Post
i tried to change any cpu_type and 24_bit_addressing but with same errors.
this is my txt.
https://mega.nz/#!i41xWTgA!2o07we5QhZoM ... lkt6Jc_ABo
or if you have success, you can send me your modied txt. i think you are able to find a working solution.
if not, i continue to use 2.4.1 that as far as, it is the best way possible now and in the future.
this is my txt.
https://mega.nz/#!i41xWTgA!2o07we5QhZoM ... lkt6Jc_ABo
or if you have success, you can send me your modied txt. i think you are able to find a working solution.
if not, i continue to use 2.4.1 that as far as, it is the best way possible now and in the future.
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- Seiya
- Commended Member
Post
i left the changes at the script (toggle extras, cpu_type 68020/68881) and i tried winuae 2.8.0.
it works.
it is not 3.5.0, but at least now there is more gfx_card supported.
if you find a solution for 3.5.0 much better
it works.
it is not 3.5.0, but at least now there is more gfx_card supported.
if you find a solution for 3.5.0 much better
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- Seiya
- Commended Member
Post
i notice that if i use from gemus
use only AGA. not set gfxcard_type.
i tried to add these 2 lines
but i have error when launch the script that cannot apply this value
Code: Select all
hdf=dir
folder=XXX
i tried to add these 2 lines
Code: Select all
If Key_gfxcard_type CONTAINS(ZorroII||ZorroIII||PicassoII||PicassoII+)
set_CFG_Value(%dbpath%\Scripts\Amiga.uae||gfxcard_type||%gfxcard_type_value%)
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- .mad.
- Honoured Member
- Location: Lancashire
Post
after selecting different gfx cards in the options.
several settings are changed in the config file.
so ALL compatible settings need to be changed, not just the gfx card name.
a few examples i noticed...
* i do not know all the correct/compatibe machine settings.
;=============================
;gfxcard_type=ZorroII
;gfxcard_type=ZorroIII
;-----------------------------
;gfxcard_size=4
;gfx_colour_mode=16bit
;gfxcard_hardware_sprite=true
;picassoiv_rom_file=[empty]
;=============================
;=============================
;gfxcard_type=PicassoII
;gfxcard_type=PicassoII+
;-----------------------------
;gfxcard_size=2
;gfx_colour_mode=16bit
;gfxcard_hardware_sprite=false
;chipset_refreshrate=49.920410
;picassoiv_rom_file=[empty]
;=============================
;=============================
;gfxcard_type=PicassoIV_Z2
;gfxcard_type=PicassoIV_Z3
;-----------------------------
;gfxcard_size=4
;gfx_colour_mode=32bit
;gfxcard_hardware_sprite=false
;win32.rtg_match_depth=false
;picassoiv_rom_file=picasso_iv_flash.rom
;cpu_24bit_addressing=false
;==============================
;==============================
;gfxcard_type=Piccolo_Z2
;gfxcard_type=Piccolo_Z3
;------------------------------
;gfx_colour_mode=32bit
;gfxcard_size=2
;chipset_refreshrate=49.920406
;picassoiv_rom_file=[empty]
;==============================
if you save separate (working for you) configs of all the gfx cards you want to use.
i will script those.
several settings are changed in the config file.
so ALL compatible settings need to be changed, not just the gfx card name.
a few examples i noticed...
* i do not know all the correct/compatibe machine settings.
;=============================
;gfxcard_type=ZorroII
;gfxcard_type=ZorroIII
;-----------------------------
;gfxcard_size=4
;gfx_colour_mode=16bit
;gfxcard_hardware_sprite=true
;picassoiv_rom_file=[empty]
;=============================
;=============================
;gfxcard_type=PicassoII
;gfxcard_type=PicassoII+
;-----------------------------
;gfxcard_size=2
;gfx_colour_mode=16bit
;gfxcard_hardware_sprite=false
;chipset_refreshrate=49.920410
;picassoiv_rom_file=[empty]
;=============================
;=============================
;gfxcard_type=PicassoIV_Z2
;gfxcard_type=PicassoIV_Z3
;-----------------------------
;gfxcard_size=4
;gfx_colour_mode=32bit
;gfxcard_hardware_sprite=false
;win32.rtg_match_depth=false
;picassoiv_rom_file=picasso_iv_flash.rom
;cpu_24bit_addressing=false
;==============================
;==============================
;gfxcard_type=Piccolo_Z2
;gfxcard_type=Piccolo_Z3
;------------------------------
;gfx_colour_mode=32bit
;gfxcard_size=2
;chipset_refreshrate=49.920406
;picassoiv_rom_file=[empty]
;==============================
if you save separate (working for you) configs of all the gfx cards you want to use.
i will script those.
Return to “Commodore Amiga - GameBase Amiga”
Who is online
Users browsing this forum: No registered users and 7 guests