what am i doing wrong???
emu just closes straight away...
Welcome to the Gamebase 64 forums. An attempt to document ALL Commodore 64 gameware before it's too late!
GB64 works but emu wont run...
Moderator: Jimbo
- Michael Plate
- GB64 Team
- Location: Stockholm
- subzero1970
- New Member
- Hidron
- Cool Member
- Location: USA
Post
There are a lot of possible variables.
Which version of the Gamebase frontend do you have installed? -v1.3 is the current one
Which version of GB64 are you running?-v08 is current
Which emulator/version of it are you using?
Did you configure the emulator inside GB64? (Gemus/Emulator Setup Wizard)
-Which game are you trying to run? (could be an issue with the game)
The more information you give us, the more likely we are to be able to help you out.
Which version of the Gamebase frontend do you have installed? -v1.3 is the current one
Which version of GB64 are you running?-v08 is current
Which emulator/version of it are you using?
Did you configure the emulator inside GB64? (Gemus/Emulator Setup Wizard)
-Which game are you trying to run? (could be an issue with the game)
The more information you give us, the more likely we are to be able to help you out.
- subzero1970
- New Member
Post
my GB64 is v1.3, my Gamebase frontend is GBC_V05
the emulator was already configured, and no games will run.
the emulator was already configured, and no games will run.
- Michael Plate
- GB64 Team
- Location: Stockholm
- subzero1970
- New Member
Post
i cant give a description really, i have amiga, speccy, vic20 gamebase and they all work fine, however when i run GB64 it loads ok but when i double click to play a game i get a small message 'waiting for emulator to close' and the emu flashes open then closes! However if i run the emulator OUTSIDE of gamebase...it plays fine!
- .mad.
- Honoured Member
- Location: Lancashire
Post
Could be a few things...
Your Script is corrupt.
VICE.INI file is missing from the emulator DIR.
Your Emulators.ini is pointing to wrong emulator location.
this could be easily fixed.
1) Put your emulators in the default location.
EXAMPLE
C:\GameBase\GBC_v08\Emulators\WinVICE-2.3-x86\x64.exe
2) Edit your EMULATORS.INI file and check the paths for the emulator and VICE.INI file.
C:\GameBase\GBC_v08\Emulators\WinVICE-2.3-x86\vice.ini
*If you do not have the Vice.ini file (the script needs it).
Run emulator, set your options and select save current settings from WinVICE menu.
3) DELETE your emulators.INI file and run the Emulator setup wizard from the GameBase menu, and browse to your emulator x64.EXE.
If you have problems, i will go through it step by step with you.
PM me.
Your Script is corrupt.
VICE.INI file is missing from the emulator DIR.
Your Emulators.ini is pointing to wrong emulator location.
this could be easily fixed.
1) Put your emulators in the default location.
EXAMPLE
C:\GameBase\GBC_v08\Emulators\WinVICE-2.3-x86\x64.exe
2) Edit your EMULATORS.INI file and check the paths for the emulator and VICE.INI file.
C:\GameBase\GBC_v08\Emulators\WinVICE-2.3-x86\vice.ini
*If you do not have the Vice.ini file (the script needs it).
Run emulator, set your options and select save current settings from WinVICE menu.
3) DELETE your emulators.INI file and run the Emulator setup wizard from the GameBase menu, and browse to your emulator x64.EXE.
If you have problems, i will go through it step by step with you.
PM me.
- .mad.
- Honoured Member
- Location: Lancashire
Post
just thought...
do you have "ZIP,"RAR","7z" in the SupportedTypes in your Emulators.ini.
if you do. REMOVE THEM.
it should look like this sample.
EMULATORS.INI
if you post ALL your INI files, like the sample above.
and tell us your emulator version and install location.
maybe we can help.
the more info you can give, the better.
Do you have GameBase on another drive other than C:\ ??
Do you have several versions of the same emulator installed.
because if you followed the above post to the letter.
it would be working.
do you have "ZIP,"RAR","7z" in the SupportedTypes in your Emulators.ini.
if you do. REMOVE THEM.
it should look like this sample.
EMULATORS.INI
Code: Select all
[Emulators]
1=WinVICE v2.3 (x86)
2=
[WinVICE v2.3 (x86)]
UseShortFilenames=1
SupportedTypes=D64;D71;D80;D81;D82;G64;G41;X64;T64;P00;TAP;PRG;CRT
EmulatorPathFile=C:\GameBase\GBC_v08\Emulators\WinVICE-2.3-x86\x64.exe
ScriptFile=WinVICE.txt
1=C:\GameBase\GBC_v08\Emulators\WinVICE-2.3-x86\vice.ini
UseDefaultTypes=0
WaitFinish=1
2=
and tell us your emulator version and install location.
maybe we can help.
the more info you can give, the better.
Do you have GameBase on another drive other than C:\ ??
Do you have several versions of the same emulator installed.
because if you followed the above post to the letter.
it would be working.
- subzero1970
- New Member
Post
tbh i think my gamebase folder is messed up! and my emulators.ini doesnt even have a c64 emulator listed!!!
gamebase is in D:\
emulator is in D:\WinVICE-2.0
heres what emulators.ini looks like:
[Emulators]
1=spin
2=Spectaculator
3=Spectaculator 6
4=
[Spectaculator]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=TZX;TAP;DSK;Z80;SNA;RZX;SZX
EmulatorPathFile=D:\spectrum_emul\Spectaculator.exe
ScriptFile=Spectaculator.txt
WaitFinish=1
1=
[Spectaculator 6]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=TZX;TAP;BLK;CSW;Z80;SNA;RZX;SZX;MDR;ROM;TRD;SCL;FDI;YDI;DSK
EmulatorPathFile=D:\Emulator\spectrum\spectaculator 6.25\Spectaculator.exe
ScriptFile=Spectaculator V6.txt
WaitFinish=1
1=
[spin]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=Z80;TAP;TZX;SNA;RZX;SZX;TRD;BLK;CSW;DSK;MDR;ROM;SCL;FDI;YDI
EmulatorPathFile=H:\GameBase\GB_ZX2\emu\SPIN061\ZXSpin.exe
ScriptFile=SPIN.txt
WaitFinish=1
1=
gamebase is in D:\
emulator is in D:\WinVICE-2.0
heres what emulators.ini looks like:
[Emulators]
1=spin
2=Spectaculator
3=Spectaculator 6
4=
[Spectaculator]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=TZX;TAP;DSK;Z80;SNA;RZX;SZX
EmulatorPathFile=D:\spectrum_emul\Spectaculator.exe
ScriptFile=Spectaculator.txt
WaitFinish=1
1=
[Spectaculator 6]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=TZX;TAP;BLK;CSW;Z80;SNA;RZX;SZX;MDR;ROM;TRD;SCL;FDI;YDI;DSK
EmulatorPathFile=D:\Emulator\spectrum\spectaculator 6.25\Spectaculator.exe
ScriptFile=Spectaculator V6.txt
WaitFinish=1
1=
[spin]
UseShortFilenames=0
UseDefaultTypes=0
SupportedTypes=Z80;TAP;TZX;SNA;RZX;SZX;TRD;BLK;CSW;DSK;MDR;ROM;SCL;FDI;YDI
EmulatorPathFile=H:\GameBase\GB_ZX2\emu\SPIN061\ZXSpin.exe
ScriptFile=SPIN.txt
WaitFinish=1
1=
- .mad.
- Honoured Member
- Location: Lancashire
Post
well that explains everything.
no wonder it doesn't work.
i will create a working setup (with all the latest C64 emulators included) and upload it tomorrow.
you might want to download the version "8" torrents while your waiting.
http://www.datafilehost.com/download-286a0df7.html
no wonder it doesn't work.
i will create a working setup (with all the latest C64 emulators included) and upload it tomorrow.
you might want to download the version "8" torrents while your waiting.
http://www.datafilehost.com/download-286a0df7.html
- .mad.
- Honoured Member
- Location: Lancashire
Post
Ok here is GBC_v08 already setup with emulators configured.
read the included text file.
Just extract to your Newly Installed GameBase folder.
c:\gamebase\
http://www.datafilehost.com/download-7aea139c.html
read the included text file.
Just extract to your Newly Installed GameBase folder.
c:\gamebase\
http://www.datafilehost.com/download-7aea139c.html
Who is online
Users browsing this forum: No registered users and 3 guests