CreateVision is a very small gamebase with nice games, but very impossible to play for a strange keyboard configuration..
https://www.sendspace.com/file/2fp4w7
Welcome to the Gamebase 64 forums. An attempt to document ALL Commodore 64 gameware before it's too late!
CreateVision
Moderator: Jimbo
- Seiya
- Commended Member
Post
CreateVision
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- .mad.
- Honoured Member
- Location: Lancashire
Post
Nice system!.
The emulator is an old version, and didn't load for me.
This version of FunnyMu is configured and working with all the correct ROMs required for CreatiVe.exe.
http://www.datafilehost.com/d/489fffa7
The emulator is an old version, and didn't load for me.
This version of FunnyMu is configured and working with all the correct ROMs required for CreatiVe.exe.
http://www.datafilehost.com/d/489fffa7
- Seiya
- Commended Member
Post
so i have to use creatiVe.exe like emulator?
however to me doesn't work
however to me doesn't work
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- .mad.
- Honoured Member
- Location: Lancashire
Post
you will need to edit the INI files for your file locations.
CreatiVe.ini
[Interface]
rompath=ROMS/
funnymupath=./
firstRun=0
FunnyMu.ini
[Bios]
path = BIOS/
bios_cv = BIOSCV.ROM
bios_fv = BIOS.ROM
usebios = bios_cv
[ROMs]
path = ROMS/
[Video]
mode = windowed
Creative works like gamebase to launch the ROM and emulator.
every rom works with this pack.
CreatiVe.ini
[Interface]
rompath=ROMS/
funnymupath=./
firstRun=0
FunnyMu.ini
[Bios]
path = BIOS/
bios_cv = BIOSCV.ROM
bios_fv = BIOS.ROM
usebios = bios_cv
[ROMs]
path = ROMS/
[Video]
mode = windowed
Creative works like gamebase to launch the ROM and emulator.
every rom works with this pack.
- Seiya
- Commended Member
Post
i have changed the path, but in WinXP x64 doesn't work.
It not find the roms.
But i don't understand if you inteded to make this version working in gamebase or to use only CreatiVe front-end
It not find the roms.
But i don't understand if you inteded to make this version working in gamebase or to use only CreatiVe front-end
Retro Trailer V2
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
https://www.facebook.com/Retro-Trailer- ... 8226392007
REV'n'GE! Fanzine
https://sites.google.com/view/retro-emu ... n-and-game
- .mad.
- Honoured Member
- Location: Lancashire
Post
This was first made to work with CreativeUI as i couldn't get your GameBase to load the all games.
So i searched for the ROM pack CreativeUI uses.
Now when i use v0.49 funnymu.exe emulator and link the 42 BIN files from GameBase it works for both.
Not sure if it's a 64bit problem, but it works in 32bit XP and Win7.
try your v0.43 emu in the setup.
--
if you delete both the ini files.
when you run creative for the first time, it will ask you to select the dir where the ROMS, BIOS and emulator are located.
select where you have the 42 BIN files.
funnymu-0.49-by-madrigal/roms
So i searched for the ROM pack CreativeUI uses.
Now when i use v0.49 funnymu.exe emulator and link the 42 BIN files from GameBase it works for both.
Not sure if it's a 64bit problem, but it works in 32bit XP and Win7.
try your v0.43 emu in the setup.
--
if you delete both the ini files.
when you run creative for the first time, it will ask you to select the dir where the ROMS, BIOS and emulator are located.
select where you have the 42 BIN files.
funnymu-0.49-by-madrigal/roms
- Fox Mulder
- Keen Member
- Location: Poland
Return to “Other GameBase Projects”
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot] and 11 guests